Product Introduction:
1.High-speed of forming, high output and reliable performance.
Using PLC (Mitsubishi technology) automatic control, hydraulic pneumatic, the production speed can be up to 6-8 pieces/min and reach a high yield and a better cost performance.
2.Products are formed by filtration mould pressure.
With the advantages of beautiful structure, various types, high density, strong strength and precise size, they can meet the demands of various types of buildings and are top quality of concrete products.
3.A multi-purpose machine.
Through replacing mould, the machine can produce various types of main tile and matching tiles
Tiles and Pallets
Production Line Composition
NO. | Name | Qty. | NO. | Name | Qty. |
1 | Main forming machine | 1 set | 9 | Drain tile mould | 1 pc |
2 | Lifting and mixing system | 1 set | 10 | T three-way round ridge | 1 pc |
3 | Main tile mould | 1 set | 11 | Y three-way round ridge | 1 pc |
4 | Main tile pallet | 2000 set | 12 | Four-way mould | 1 pc |
5 | Round ridge tile manufacturing machine | 1 set | 13 | Round ridge seal | 1 pc |
6 | Round ridge tile pallet | 50 pc | 14 | Cornice seal | 1 pc |
7 | Cornice tile manufacturing machine | 1 set | 15 | Oblique ridge seal | 1 pc |
8 | Cornice tile pallet | 30 pc |
Auxiliary Machine(customer owned by oneself)
Name | Specification | Qty |
Workshop | 15-10 ㎡ | 1 space |
Tile shelf | 120 pieces/shelf | 17 pcs |
Manual hydraulic forklift | 3T | 1 pc |
Air compressor | W-0.9/7 | 1 pc |
Maintenance room | 10*3 ㎡ | 1 space |
Tile yard | 400 ㎡ | |
Consumables | Filter cloth,wire net,release agent | |
List of ingredients
Raw material | Specification | Qty(kg) | Remark |
Cement | 425# | 50 | |
Sand | Coarse sand and fine sand | 80-100 | Sand degree(<=10%) |
Pigment | Iron oxide | 1.5 |
Step 1:dry-mixing raw material 5 minutes
Step 2:mixing raw material with water 5-10 minutes
( Note: sand : cement = 1.8 : 1, 50kg cement can produce 31-34 pieces tiles )
Parameters:
SMY8-180 | |
Rated pressure | 220 t |
Production capacity | 6-9 pcs/min |
Forming method | Mould pressing |
Power | 18 KW |
Product size | 424*337 mm |
Dimension | 3100*1600*2600 mm |
Worker | 4 pcs/shift |
0086 13676921790
